BIOTAB7 KILLS ALL MOLD

When it comes to mold, there’s no time to waste. Only time to kill.
Treat mold in minutes in homes, offices, gardens and even boats.

biotab7: the disinfectant fungicide that kills all mold.

HOMES

DIY mold removal.
Effective. Easy. Safe.

REMEDIATION BUSINESSES

Talk to us or our distributors
about why we are better at lower costs.

INDUSTRIAL SCALES

Biotab7 is scalable, easy to dose,
and effectively treats large environments.

HOW TO USE BIOTAB7 FOR MOLD REMEDIATION

1. PRE-CLEAN

Remove gross soils and surface mold build-up. For serious infestations, apply a pre-treatment like Synergy Soil Break to dehydrate the mold.

2. MIX

Add five x 1 gram tablets to a 1 quart spray bottle and fill with water. This will give you a powerful solution of 500 PPM. Buy Biotab7 here.

3. SPRAY

Spray liberally, misting occasionally. Biotab7 will eliminate surface mold, chase the microbes buried within the substrate, and kill airborne spores.

4. DONE

Watch the mold disappear within 5 minutes. Wipe away residue and muck. For extra protection, leave an open container of Biotab7 to kill airborne spores.

WHAT TO WEAR

The EPA recommends you wear the following to protect yourself from from spores released by the mold remediation process.

  • N-95 respirator or similar ($12 – $25)
  • Rubber gloves
  • Eye goggles
  • Old clothes

TOP TIPS

These tips will help maximize your mold remediation efforts.
The most important part of the process is keeping your family and environment safe.
The goal is to contain any spores released by the remediation process from spreading.

  • Turn off A/C and heating to reduce airborne spore movement during treatment
  • Put any cloths, paper towels, or sponges used into a ziplock and trash immediately.
  • Use a drop sheet to protect flooring and carpets
  • If in doubt – consult with a mold remediation specialist

The Clorox® Company, OSHA and the EPA have determined that chlorine bleach should not be used for mold remediation.

BEFORE AND AFTER BIOTAB7

mold-before-biotab7
mold-after-biotab7

BUY BIOTAB7 TODAY

BIOTAB7 50g POUCH

  • 1 pouch of 50 x 1g tablets
  • Ideal if you already have your own new spray bottle

SEVEN SPRAY PACK

  • 1 pouch of 50 x 1g tablets
  • 1q spray bottle
  • Perfect starter pack

THE WORKS

  • 2 pouches of 50 x 1g tablets
  • 1q spray bottle
  • Deodorizing Jar: extra line of attack to kill airborne spores
  • The all-bases-covered Pack

VISIT OUR SHOP

  • Biotab7 Pouches
  • Spray Bottles
  • Deodorizing Jars
  • Perfect for mold remediation specialists

KILLS ALL MOLDS

HOMES, OFFICES, HOTELS

  • Stachybotrys (black mold)
  • Aspergillus (common in American homes)
  • Cladosporium (respiratory risk)
  • Alternaria (most common allergenic mold in the world)
  • Penicillin (water damage)

HORTICULTURE

  • Botrytis (greenhouses and marijuana (aka bud rot)
  • Powdery Mildew (onions, wheats, cannabis)
  • S. sclerotiorum (aka white mold, on vegetables, tomatoes, trees)

DANGERS OF MOLD

Black mold is a neurotoxin, triggering headaches and brain fog. While it’s well known that mold triggers asthma and respiratory illness, some molds produce mycotoxins that lead to chronic health problems in humans and animals.

WHY YOU NEED BIOTAB7

Dead mold spores are just as harmful as live ones, so you need a fungicide like Biotab7 that is specifically designed to kill the organism – not just a general cleaner.

7 REASONS FOR BIOTAB7

1. EASY TO USE

Add five x 1gram tabs to a 1 q spray bottle. Apply.

2. FAST

1 to 5 minutes = mold destroyed.

3. LOW-COST

The tablet form keeps costs down. You get 50 tabs in a 50g pouch, providing multiple uses from one pouch.

4. DOESN’T STINK

.Biotab7 is commonly used as an air purifier. No chemical smells or toxic odors.

5. POTENT BUT SAFE

Biotab7 only attacks the bad guys. It is safe to use around children and animals. Non-carcinogenic and no toxic by-products.

6. LITERALLY CLEANS THE AIR

Bona fide air decontaminator. Remember the 2001 anthrax attacks? The same chemistry was used to kill the anthrax spores. It also kills mold spores.

7. BIOTAB7 IS 18 PRODUCTS IN ONE

Decontaminant, fungicide, mildewcide algaecide, antiviral, bactericide, deodorizer, sanitizer – check the full list here. Biotab7 is an antimicrobial, designed and armed to do the job.

image_02-8
mold-apply-2
mold-apply-1

A musty odor is a telltale sign of mold: the mold is releasing microbial volatile organic compounds (MVOCs) into the air.

PREVENTING MOLD

Prevent mold by keeping the environment dry and clean.

STAYING DRY

The Environmental Protection Agency (EPA) recommends maintaining a relative humidity between 30% to 50% to prevent mold growth. You can measure this with a hygrometer: an affordable tool ($10-$50) found at most hardware stores. If your reading is above 45% humidity, it’s time to act.

  • Ensure adequate ventilation in kitchens, bathrooms, and wet areas
  • Use dehumidifiers
  • Maintain HVAC units
  • Maintain air filters
  • Check for plumbing leaks
  • Use Biotab7 to clean at-risk surfaces

KEEP IT CLEAN

Mold thrives in cluttered spaces where dampness forms. Whilst it grows on common building materials, it can also feed on cockroach and dust mite feces, skin flakes, and food particles. Utilizing a strong and safe biocide like Biotab7 destroys these potential growth mediums, stopping mold before it can start.

MOLD COLONY GROWTH RATES

This data comes from the study Controlled Study of Mold Growth by Krause, Geer, Swenson, Fallah, & Robbins (2006), available here.

Mold establishes itself slowly for the first few weeks, before exploding into a rapid growth cycle at approximately 4 weeks.

Spores present were stachybotrys (black mold), penicillium, cladosporium, and acremonium. “Nearly confluent colonization” occured – meaning small spore growths started in patches, but quickly merged into large colonies.

At the end of the 10 week study, the colonies spanned two square feet.